New Leica WDM65 Full Waveform Digitizer for Leica ALS systems now supported by Leica FCMS 3.22

April 13, 2010 -- The newly released Leica FCMS Flight and Sensor Control Management System Version 3.22 now also supports the new WDM65 Full Waveform Digitizer for Leica ALS60 and Leica ALS50-II systems, allowing highly automated LIDAR waveform data collection during the flight.

In addition to automatically triggering data recording during the flight line, Leica FCMS 3.22 allows all key LIDAR system settings (FOV, scan rate, pulse rate, range gate settings) to be passed from the FPES Flight Planning and Evaluation Software directly to the system. This facilitates automated system setup for data recording and easily accommodates different system settings for each flight line.

Leica FCMS 3.22 also allows straightforward manual operation and diagnostic messages during data acquisition are now accessible directly on to the operator screen, without the need to access several screen views.
Find more information on www.leica-geosystems.com



Read the complete story ...


Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Avionics System Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise