Applanix Introduces POSPac MMS 5.4 with IN-Fusion Precise Point Positioning Technology for Robust Decimeter Level Positioning without Base stations

COLOGNE, Germany, October 5, 2010 – Applanix announced today a new version of its post-processing software for Mobile Mapping and Positioning, POSPac MMS version 5.4. Designed to enhance the productivity of Mobile Mapping, POSPac MMS 5.4 features an all-new Inertially-Aided Precise Point Positioning (IAPPP) engine and enhanced smoothing algorithm.

The announcement was made today at INTERGEO 2010, the world’s largest conference on geodesy, geoinformatics and land management.

Precise Point Positioning (PPP) is an effective GNSS processing technique that uses precise clock and ephemeris information to converge to decimeter level position accuracy without base stations or expensive commercial SBAS subscriptions. It is an ideal and cost effective method of positioning for mobile surveys in remote areas or where centimeter level accuracy is not required. Traditionally, PPP techniques suffer degradation in accuracy following any loss of GNSS signal, requiring significant time for the solution to re-converge. Applying the Applanix IN-FusionTM techniques to PPP overcomes this by using inertial data to mitigate for signal outages and to retain full solution convergence. This means:

  • Survey aircraft can fly sharp, high-banked turns to reduce time in the air for increased productivity, without concern for degraded accuracy
  • Hydrographic survey vessels can obtain a decimetric accuracy PPP solution even when operating in port environments or around offshore structures where GNSS signal outages may be common
  • Land survey vehicles can lose full signal lock when passing under bridges and through tunnels and still maintain converged PPP positioning accuracy after the outage

POSPac MMS 5.4 also uses a new smoother algorithm for reverse time processing, greatly reducing or eliminating the position discontinuities associated with satellite constellation or fixed ambiguity changes. This is ideal for applications such as high-resolution mobile laser scanning which measure thousands of points per second

“The IN-Fusion IAPPP technology in POSPac MMS 5.4 brings a new level of robustness to precise point positioning for mobile mapping applications,” said Edith Roy, Development Manager of POSPac MMS at Applanix. “The new software version continues the Applanix tradition of providing new and innovative products to our customers.”

POSPac MMS version 5.4 is available through the Applanix sales network, and to all POSPac users currently under a maintenance contract. For more information about the system, visit: www.applanix.com.

ABOUT APPLANIX

Applanix, a Trimble Company (NASDAQ: TRMB), develops, manufactures, sells and supports products and solutions for Mobile Mapping and Positioning. Applanix’ Position and Orientation Systems (POS) are used in a variety of applications, including road profiling, GIS data acquisition, aerial surveying and mapping, railroad track maintenance and seafloor mapping. Established in 1991, Applanix supports customers around the world with exceptional service.



Contact:

Applanix Corporation
Andrew Stott
Marketing & Communications
PH: (289) 695-6019




Review Article Be the first to review this article

Harris

Jobs
GIS Software Developer for UDC at Englewood, CO
GIS Analyst for G2 Partners LLC at San Ramon, CA
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Upcoming Events
Commercial UAV EXPO Americas at The Westgate Resort Las Vegas NV - Oct 24 - 26, 2017
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
UnmannedCanada 2017 at Sheraton Parkway Toronto North Toronto Ontario Canada - Nov 1 - 3, 2017
Scientific Days of Geographical Applications, Geometric Sciences and Digital Technologies at HOTEL NIPPON TAKSIM ISTANBUL ISTANBUL Turkey - Nov 7 - 10, 2017
Teledyne Optech
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise