Autodesk Reports 15 Percent Third Quarter Revenue Growth

Strong Growth in Profitability and Cash Flow from Operations

SAN RAFAEL, Calif. — (BUSINESS WIRE) — November 15, 2011Autodesk, Inc. (NASDAQ: ADSK) today reported financial results for the third quarter of fiscal year 2012.

  • Revenue was $549 million, an increase of 15 percent compared to the third quarter of fiscal 2011.
  • GAAP operating margin was 16 percent, compared to 15 percent in the third quarter of fiscal 2011.
  • Non-GAAP operating margin was 25 percent, compared to 21 percent in the third quarter of fiscal 2011. A reconciliation of GAAP to non-GAAP results is provided in the accompanying tables.
  • GAAP diluted earnings per share were $0.32, compared to $0.23 in the third quarter of fiscal 2011.
  • Non-GAAP diluted earnings per share were $0.44, compared to $0.32 in the third quarter of fiscal 2011.
  • Cash flow from operating activities was $138 million, compared to $114 million in the third quarter of fiscal 2011.

“Our business grew 15% in the third quarter as more and more people turned to Autodesk to help solve their most pressing design and engineering challenges,” said Carl Bass, Autodesk president and CEO. “Our strong revenue gains coupled with continued cost controls resulted in a healthy improvement in profitability and cash flow from operations. We experienced double-digit growth across all geographies, with particular strength in Asia Pacific. All of our businesses performed well, driven by continued adoption of our suites.”

Third Quarter Operational Overview

EMEA revenue was $202 million, an increase of 10 percent compared to the third quarter last year as reported and 8 percent on a constant currency basis. Revenue in the Americas was $200 million, an increase of 12 percent compared to the third quarter last year. Revenue in Asia Pacific was $146 million, an increase of 28 percent compared to the third quarter last year as reported and 19 percent on a constant currency basis. Revenue from emerging economies was $87 million, an increase of 15 percent compared to the third quarter last year as reported and 11 percent on a constant currency basis. Revenue from emerging economies represented 16 percent of total revenue in the third quarter.

Revenue from the Platform Solutions and Emerging Business segment was $210 million, an increase of 21 percent compared to the third quarter last year. Revenue from the Architecture, Engineering and Construction business segment was $152 million, an increase of 12 percent compared to the third quarter last year. Revenue from the Manufacturing business segment was $134 million, an increase of 14 percent compared to the third quarter last year. Revenue from the Media and Entertainment business segment was $53 million, an increase of 6 percent compared to the third quarter last year.

“We continue to advance on our plan of driving revenue growth and expanding our operating margin, controlling our costs, and making appropriate investments in the future of our business,” said Mark Hawkins, Autodesk Executive Vice President, Chief Financial Officer. “Our cash flow from operating activities remained strong, growing 20 percent, and helped fund a number of small, but important, business and technology acquisitions and strategic investments during the quarter. Our balance sheet remains solid with over $1.5 billion in cash and marketable securities and no debt.”

Business Outlook

The following statements are forward-looking statements that are based on current expectations and assumptions, and involve risks and uncertainties some of which are set forth below.

Fourth Quarter Fiscal 2012

4Q FY12 Guidance Metrics       4Q FY12 (ending January 31, 2012)
Revenue (in millions) $575 to $590
EPS - GAAP $0.26 to $0.29
EPS - Non-GAAP $0.42 to $0.45

1 | 2 | 3 | 4  Next Page »



Review Article Be the first to review this article

Harris

Jobs
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Senior Structural Engineer for Wiss,Janney, Estner Assoicates, Inc at houston, Texas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
DroneCon 2018 at MIDRAND, JHB South Africa - May 16 - 18, 2018
GEO Business 2018 at 52 Upper Street London United Kingdom - May 22 - 23, 2018
Upper Midwest Geospatial Conference (UMGEOCON) at 521 East Ave North La Crosse WI - May 23 - 24, 2018
2nd WY UAV Symposium at UW Convention Center 2229 Grand Ave LARAMIE WY - May 30 - 31, 2018
GENEQ
Canon: oce crystalPoint
Teledyne Optech
Teledyne:
Interdrone 2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise