3D Printing Helps Doctors Rehearse Complex Brain Procedures
[ Back ]   [ More News ]   [ Home ]
3D Printing Helps Doctors Rehearse Complex Brain Procedures

Four-case series documents accuracy and enhanced safety with the models

BOSTON, July 31, 2015 — (PRNewswire) —  Boston Children's Hospital physicians report the first cases of children benefiting from 3D printing of their anatomy before undergoing high-risk brain procedures. The four children had life-threatening cerebrovascular malformations (abnormalities in the brain's blood vessels) that posed special treatment challenges.

A 3D-printed vein of Galen malformation. Credit: Boston Children's Hospital

Reporting online today in the Journal of Neurosurgery: Pediatrics, the physicians describe the use of 3D printing and synthetic resins to create custom, high-fidelity models of the children's vessel malformations along with nearby normal blood vessels. In some cases, the surrounding brain anatomy was also printed.

"These children had unique anatomy with deep vessels that were very tricky to operate on," says Boston Children's neurosurgeon Edward Smith, MD, senior author of the paper and co-director of the hospital's Cerebrovascular Surgery and Interventions Center. "The 3D-printed models allowed us to rehearse the cases beforehand and reduce operative risk as much as we could."

The children ranged in age from 2 months to 16 years old. Three of the four children had arteriovenous malformations (AVMs), in which tangles of arteries and veins connect abnormally, and were treated surgically.

"AVMs are high-risk cases and it's helpful to know the anatomy so we can cut the vessels in the right sequence, as quickly and efficiently as possible," says Smith. "You can physically hold the 3D models, view them from different angles, practice the operation with real instruments and get tactile feedback."

The 2-month-old infant had a rare vein of Galen malformation in which arteries connect directly with veins—bypassing the capillaries—and was treated with an interventional radiology technique to seal off the malformed blood vessels from the inside.

"Even for a radiologist who is comfortable working with and extrapolating from images on the computer to the patient, turning over a 3D model in your hand is transformative," says Darren Orbach, MD, PhD, chief of Interventional and Neurointerventional Radiology at Boston Children's and co-director of the Cerebrovascular Surgery and Interventions Center. "Our brains work in three dimensions, and treatment planning with a printed model takes on an intuitive feel that it cannot otherwise have."

The life-sized and enlarged 3D models were created in collaboration with the Boston Children's Hospital Simulator Program ( SIMPeds) using brain magnetic resonance (MR) and MR arteriography data from each child. Measurements of the models showed 98 percent agreement with the children's actual anatomy.  

All four children's malformations were successfully removed or eliminated with no complications. When two of the AVM patients were compared with controls who did not have 3D-printed models—matched for age, size and type of AVM, surgeon and operating room—those with 3D models had their surgical time reduced by 12 percent (30 minutes). (Actual surgical time was 254 and 257 minutes for the cases with 3D models and 285 and 288 minutes for the controls.) Even a 30-minute reduction is significant for children who are especially sensitive to anesthesia.

Smith and Orbach are continuing to use 3D models for their trickier cases. "3D printing has become a regular part of our process," says Smith. "It's also a tool that allows us to educate our junior colleagues and trainees in a way that's safe, without putting a child at risk."

SIMPeds director Peter Weinstock, MD, PhD, was first author on the paper; co-authors were Orbach, Sanjay Prabhu, MBBS, FRCR, and Katie Flynn, BS, ME, all of Boston Children's Hospital. The study was supported by the Lucas Warner AVM Research Fund and The Kids At Heart Neurosurgery Research Fund.

Boston Children's Hospital is home to the world's largest research enterprise based at a pediatric medical center, where its discoveries have benefited both children and adults since 1869. More than 1,100 scientists, including seven members of the National Academy of Sciences, 11 members of the Institute of Medicine and 10 members of the Howard Hughes Medical Institute comprise Boston Children's research community. Founded as a 20-bed hospital for children, Boston Children's today is a 397-bed comprehensive center for pediatric and adolescent health care. Boston Children's is also the pediatric teaching affiliate of Harvard Medical School. For more, visit our Vector and Thriving blogs and follow us on our social media channels: @BostonChildrens, @BCH_Innovation, Facebook and YouTube.  

CONTACT: Keri Stedman or Bethany Tripp
Boston Children's Hospital
Email Contact | Email Contact

A 3D-printed arteriovenous malformation (AVM) shown embedded in the surrounding brain tissue. Credit: Boston Children's Hospital

Photo - http://photos.prnewswire.com/prnh/20150731/252410
Photo - http://photos.prnewswire.com/prnh/20150731/252411


To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/3d-printing-helps-doctors-rehearse-complex-brain-procedures-300121942.html

SOURCE Boston Children's Hospital

Boston Children's Hospital
Web: http://www.childrenshospital.org/