New performances specified for minimizing Power Regulator Capacitances
[ Back ]   [ More News ]   [ Home ]
New performances specified for minimizing Power Regulator Capacitances

Grenoble, France – Reducing the cost of Bill-of-Material (BoM) remains SoC Integrators' vital challenge for IoT applications, while minimizing power consumption demands the acute complexity of mode control for Dynamic Voltage and Frequency "Stepping" (DVFS). 

External capacitors and their associated pins are the first target for BoM reduction, up to the ultimate solution provided bycapless regulators

To avoid any risk on output voltage stability during current peaks, which may result in a performance degradation of the load, referring to the maximum current surge only (Ipeak) is insufficient. Dolphin Integration thus introduces the missing specification by launching the innovative template needed for embedding low BoM regulators, down to pinless, namely the dynamic Load Current Tolerance Template (LCT2). 

It enables users to improve the resulting Load Transient performance, which is the property of the regulator and of the load

For optimizing the pairing of regulator and load, an Abacus for adapting the load capacitance with filler capacitors must be provided.

Besides this issue of load steady-state functioning, its start-up sequence must be secured beyond a mere Imax by complying with the dynamic In-rush Current Tolerance Template (ICT2).
The need of both LCT2 and ICT2 is acute:

The LCT2 is a must in the specification of any regulator, as well as the ICT2, such as specified for the iLR-LaDiable

Overall, Dolphin Integration empowers SoC integrators to embed and to optimize the whole power network with its complete offering of  regulators, compliant with the  DELTA Standard.