Zarlink Introduces High Performance Synchronous Ethernet Devices

OTTAWA, CANADA -- (MARKET WIRE) -- Apr 15, 2008 -- Zarlink Semiconductor Inc. (TSX: ZL)(NYSE: ZL) today introduced Synchronous Ethernet devices that allow manufacturers to design next-generation equipment or retrofit existing equipment to support the more cost-effective delivery of time-sensitive services over packet networks. Lead customers have already designed Zarlink's Synchronous Ethernet products into networking equipment, including passive optical network (PON), cellular backhaul and optical transport platforms and routers.

"Carrier-grade Ethernet is now a reality as service providers deliver a complete range of communication applications over higher bandwidth, lower cost IP networks," said Jeremy Lewis, product line manager with Zarlink's Timing and Synchronization group. "Zarlink is the first supplier to deliver a comprehensive portfolio of integrated, high-performance and standards-compliant Synchronous Ethernet timing chips. Our Synchronous Ethernet devices are a critical technology allowing service providers to deliver truly reliable voice, video, data and legacy services across the growing packet network."

Zarlink's second-generation of Synchronous Ethernet products, the ZL30130 and ZL30138 are highly integrated 1 GbE and 10 GbE network synchronization devices that ease system integration, lower component count and reduce power consumption. The new devices meet Synchronous Ethernet timing requirements, including the International Telecommunications Union (ITU-T) G.8262 recommendation. The ITU-T G.8262 recommendation defines phase locked-loop (PLL) performance characteristics, including wander, jitter, phase transients, clock bandwidth, frequency accuracy and holdover. Full compliance with this recommendation is essential for service providers as they plan the synchronization of packet networks.

As well as supporting Synchronous Ethernet, the ZL30130 and ZL30138 Timing Card devices meet the requirements of Telcordia GR-1244 Stratum 2/3/3E & GR-253, as well as ITU-T G.812 and G.813. Support for ITU-T G.781 SETS is also offered, meeting SONET/SDH jitter generation requirements up to OC-192/STM-64.

These devices are ideal for both Carrier-Class Ethernet and SONET/SDH network equipment. The ZL30130 device fully meets the jitter-generation requirements for all 1 GbE clocks, including 25 MHz, 50 MHz, 62.5 MHz and 125 MHz. The ZL30138 device provides ultra-low jitter performance ideal for providing 10 GbE clocks up to 156.25 MHz and 312.25 MHz coupled with telecom clock rates up to 622.08 MHz with low jitter for OC-192/STM-64 SONET/SDH applications.

Both products integrate dual digital PLLs to simultaneously support transmit and receive timing paths, allowing the devices to offer rate conversion of the recovered PHY clock at the same time as providing a filtered reference clock for use on the backplane or by the Ethernet PHY. As well, both devices offer loop filter values down to 0.3 mHz, suitable for both SONET/SDH and Synchronous Ethernet applications.

Availability and support

Zarlink's second-generation Synchronous Ethernet timing chips are now in volume production. For more, visit http://products.zarlink.com/product_profiles/ZL30130 and products.zarlink.com/product_profiles/ZL30138

Complete information on Zarlink's Synchronous Ethernet timing devices, including complete data sheets and applications notes, is available to qualified customers. To learn how to become a qualified customer, please contact your local sales representative or send an email to Email Contact.

About Zarlink Semiconductor

For over 30 years, Zarlink Semiconductor has delivered semiconductor solutions that drive the capabilities of voice, enterprise, broadband and wireless communications. The Company's success is built on its technology strengths including voice and data networks, optoelectronics and ultra low-power communications. For more information, visit www.zarlink.com.

Shareholders and other individuals wishing to receive, free of charge, copies of the reports filed with the U.S. Securities and Exchange Commission and Regulatory Authorities, should visit the Company's web site at www.zarlink.com or contact Investor Relations.

Certain statements in this press release constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance, or achievements expressed or implied by such forward-looking statements. Such risks, uncertainties and assumptions include, among others, the following: our dependence on the successful development and market introduction of new products; our dependence on revenue generation from our legacy products in order to fund development of our new products; our ability to successfully integrate Legerity and any businesses acquired in the future; any potential undisclosed liabilities associated with the Legerity acquisition; our ability to operate profitably and generate positive cash flows in the future; our dependence on our foundry suppliers and third-party subcontractors; order cancellations and deferrals by our customers; and other factors referenced in our Annual Report on Form 20-F. Investors are encouraged to consider the risks detailed in this filing.

Zarlink and the Zarlink Semiconductor logo are trademarks oof Zarlink Semiconductor Inc.

Contacts:
Zarlink Semiconductor Inc.
Ed Goffin
Media Relations
613-270-7112

Email Contact

Zarlink Semiconductor Inc.
Mike McGinn
Investor Relations
613-270-7210

Email Contact





Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise