New Product Stakes Claim in 3D MCAD Space
[ Back ]   [ More News ]   [ Home ]
New Product Stakes Claim in 3D MCAD Space

SpaceClaim Corp. announced the launch of its flagship product, SpaceClaim Professional 2007. Recognizing that the benefits of 3D mechanical design remain out of reach for most who contribute directly to product development, SpaceClaim Corp. makes 3D modeling accessible through a highly flexible design environment coupled with a modern user experience. With SpaceClaim Professional 2007, engineers retain focus on their core competencies while benefiting from a powerful 3D modeler that speeds their contributions to the product development process. SpaceClaim distinguishes itself further with an open data format that ensures full and continued access to product definition.

"SpaceClaim Professional 2007 finally puts usable 3D at the fingertips of engineers. This allows them to easily contribute more complete and accurate input earlier in the product lifecycle, when it is most cost-effective," said Mike Payne, SpaceClaim CEO, and previously a co-founder of PTC and SolidWorks. "SpaceClaim Professional 2007 breaks new ground by providing a modern, user-focused 3D mechanical design experience for engineering professionals who work with the design team to bring higher quality products to market faster. Through a select number of intelligent tools, SpaceClaim frees users to focus on their design contributions rather than struggling with how to use 3D software."

SpaceClaim bridges the gap between designers and those in the extended product development team--such as suppliers, manufacturing engineers, analysis engineers, and engineering management--who lack access or time to master the designers' 3D CAD system. To date, the benefits of 3D have remained concentrated in the hands of dedicated CAD specialists. As a result, the people who contribute to design conceptualization, review, analysis, and manufacturing communicate with the design team through insufficient view-only file formats or, even, paper.

With SpaceClaim the extended team can work directly with the 3D model to fully investigate the impact of each idea and validate the geometry of change requests before sharing them with the design team. This improves the quality of each design iteration and frees the CAD specialist to work with only valid requests, resulting in higher quality products and shorter time to market.

SpaceClaim Professional 2007 fits into the existing workflow of product development by enabling users to import and work with models created in many CAD systems. Additionally, SpaceClaim's open XML data format ensures that its customers, rather than the software vendor, retain ownership of and access to their product data.

SpaceClaim Professional 2007 provides robust 3D modeling capabilities, using a select number of intelligent tools, in a unified part and assembly workspace. SpaceClaim Professional 2007 key features and benefits include:

SpaceClaim Professional 2007 will be released on 30 March 2007 and will be available for license at a price of $125 per month, per user, based on a 3-year term. A 1-year term is also available, and both terms include full support and updates. The SpaceClaim product line includes: SpaceClaim Professional 2007 with complimentary Home Edition, and a free SpaceClaim Viewer. In addition, SpaceClaim offers a Data Exchange product for translators beyond the industry standards and a product that supports CATIA V5 data exchange. SpaceClaim also offers a library of standard parts.


Commentary By Jeffrey Rowe, Editor

I recently spent for about an hour on a conference call as a SpaceClaim application engineer walked me through some of the highlights of the new product, while Mike Payne, the company’s CEO narrated the demonstration and fielded questions. As most of you may know, Mr. Payne is no stranger to the CAD industry, because prior to taking the helm at SpaceClaim, he was CEO of Spatial Corp. and, before that, CTO of Dassault Systèmes. Mr. Payne also was a co-founder of SolidWorks and served as Executive VP of R&D for the company from 1994 to 1999. Prior to 1994, Mr. Payne was a founder and former VP of development for Parametric Technology Corporation (PTC). Needless to say, he’s been around the block a time or two when it comes to MCAD.

As a matter of fact, the SpaceClaim executive ranks are extensively represented with former PTC employees. Also, on the board of directors is Steven C. Walske, former Chairman and CEO of PTC. So, all in all, the SpaceClaim executive suite is home to some pretty heavy hitters with lots of experience in the CAD arena. Will all of that experience be enough this time around? That’s hard to say because it’s a much different world in the MCAD market than it was 20, 10, 5, or even 2 years ago. That is to say, the MCAD market has become much more competitive.

Targeted at the traditional CAD non-user, SpaceClaim Professional 2007 has ACIS as its underlying geometric modeling kernel. Mr. Payne said that one of the main focuses of the product was to make it as intuitive as possible for users new to CAD or those who had experienced difficulties with it in the past, meaning that it is “designer oriented,” and not necessarily “operator oriented.” It has an “open” ASCII-readable product structure and can be used in using top-down or bottom-up design methods. Mr. Payne also said it could be used as a standalone design product or in a complementary role alongside another MCAD application, such as SolidWorks. This is one of the difficulties I have with SpaceClaim professional, namely, having to purchase an additional CAD product to supplement on I already have. If and when your subscription runs out, the product is relegated to data view and export only.

Also, I don’t if this has any significance at all, but the physical headquarters of SpaceClaim is a mere few hundred feet from SolidWorks’ HQ. Founded in September 2005, SpaceClaim is backed by Kodiak Venture Partners and North Bridge Venture Partners, a couple of significant players in the venture capital community.

Is SpaceClaim Professional as intuitive as the company insists? I’m not going to touch that one until I have some personal hands-on experience with it; however, the demo had some aspects that made it look promising.

Now for the million-dollar question, “Will SpaceClaim succeed where others have also succeeded, but also where many have failed?” That’s really a loaded question for a number of different reasons. I would have to say, that while the odds are against it, based on the personnel at the company, their collective track record betters those odds in their favor. While I am somewhat skeptical, I’m willing and anxious to track SpaceClaim and its flagship product and see how they fare in the MCAD marketplace. As with any new entrant into the MCAD space, we wish them well. 

The Week’s Top 5

At MCADCafé we track many things, including the stories that have attracted the most interest from our subscribers. Below are the five news items that were the most viewed during last week.

Alibre Design V9.2 Released
Alibre unveiled Alibre Design 9.2. Among the major enhancements in version 9.2 are compatibility with the new Windows Vista operating platform and an expansion of Adobe Acrobat PDF publishing capabilities for 3D mechanical design projects. A major aspect of Vista support in Alibre Design 9.2 is the recently released operating system’s use of DirectX for real-time accelerated graphics, a function crucial to rendering models in 3D CAD. Alibre Design has always employed DirectX, while most other 3D CAD applications rely on OpenGL-based graphics. Previous versions of Microsoft operating systems directly supported OpenGL whereas in Vista, OpenGL is layered on top of DirectX which can degrade graphics performance in OpenGL-based applications. Alibre Design 9.2 also has expanded PDF publishing that will build upon Adobe’s expanding 3D PDF strategy, including support for 3D PDF in all versions of Alibre Design along with a bundle consisting of Alibre Design Expert and Adobe Acrobat 3D. The pending release of Acrobat 3D 8.0 will include the ability to interoperate with the native file formats of virtually every major CAD system, expanding Alibre Design customers’ ability to import, edit, and augment 3D designs from other CAD systems including SolidWorks, Pro/ENGINEER, Unigraphics, CATIA, and Autodesk Inventor.

SolidWorks Helps Trek Bicycle Invent the "Lime"

Remember the bike you had as a kid? Remember the color and how you felt riding it? It's those rapturous feelings that Trek Bicycle Corp., with the help of SolidWorks, is recreating with the launch of the Trek Lime -- a new kind of bike for a different type of bicycle consumer - those who long ago abandoned cycling but just might want to ride again. The Trek Lime is an "everybike" with a coaster brake, fully automatic shifting, no cables, ultra-simple lines, a comfortable seat and - for the cool factor - swappable chain guards and handgrips in six different colors. And it's maintenance-free. SolidWorks software was instrumental in the design of the machine, which underwent myriad iterations based on research with an entirely different cohort from the company's usual target market of die-hard cyclists. As Trek industrial designers went through concept after concept, they were able to sketch directly on SolidWorks models by employing pressure-sensitive monitors that served as drawing tablets.

GoEngineer Earns North America Award for Top SolidWorks Reseller
GoEngineer Inc. was recognized by SolidWorks as its top SolidWorks and COSMOSWorks reseller in North America, an honor it has received for the fifth time. GoEngineer is a SolidWorks Reseller supporting customers in the Western U.S. SolidWorks also recognized GoEngineer’s application engineers and certified trainers, Mike Spens and Jim Boland, as Elite Application Engineers for 2006.

Engineer Sean Dotson Wins 2007 CAD Society Joe Greco Community Award
The CAD Society announced mechanical engineer, business owner, and web site develop er, Sean Dotson as the winner of its 2007 Joe Greco Community Award. For years, Dotson has contributed his CAD expertise on his online technology forums. Dotson has been a longtime participant in the Autodesk Inventor user community, a regular presenter at Autodesk User Group events, a developer of several related applications, and is a well-known CAD industry advisor and commentator. The CAD Society's Joe Greco Community Award is awarded each year to one individual who has distinguished themselves by improving communication and developing community within the CAD industry.

Professor Jay Sunyogh Wins 2007 CAD Society Leadership Award

The CAD Society announced Rio Hondo College professor Jay Sunyogh as the winner of its 2007 Leadership Award. The CAD Society recognized Sunyogh for his contributions during his teaching career and his educational programs aimed for underprivileged students. In addition to his distinguished career as dedicated educator and administrator, Sunyogh has chaired a CAD and drafting contest for over 50 Los Angeles high schools, including many from the inner city. The CAD Society Award for Leadership is awarded to an individual in the CAD industry whose outstanding technical and/or business leadership over the past year has significantly contributed to the benefit of the CAD community. Sunyogh is head of the department of architecture and computer aided design at Rio Hondo Community College in Whittier, California. He has set up and coordinates a program that offers introductory coursework in architecture, civil design, and mechanical design.

Jeffrey Rowe is the editor of MCADCafé and MCAD Weekly Review. He can be reached at Email Contact or 408.850.9230.



This Week

Lead Story

Product and Company News
Related MCAD News

Corporate Moves

Industry Events