Resources -> GIS Tutorials

Title
Description
Views
Geographic Information Systems Geographic information system (GIS) technology can be used for scientific investigations, resource management, and development planning. For example, a GIS might allow emergency planners to easily calculate emergency response times in the event of a natural disaster, or a GIS might be used to find wetlands that need protection from pollution. 770
Geomatica OrthoEngine v10.3 Tutorial Orthorectifying ADS40/80 Data The Leica ADS40/80 airborne digital sensor is superior to any other large format digital airborne imaging technology available today. ADS40/80 sensor (currently in its third generation) is a line-scanning sensor that collects images in a 12,000 pixel wide swath. This camera can simultaneously collect panchromatic, color and color-infrared stereo imagery. All multispectral bands are collected simultaneously at the same high resolution, providing 5-band, co-registered and equal resolution imagery from data acquisition. 144
Map Projection These materials were developed by Peter H. Dana, Department of Geography, University of Texas at Austin, 1995. These materials may be used for study, research, and education in not-for-profit applications. If you link to or cite these materials, please credit the author, Peter H. Dana, The Geographer's Craft Project, Department of Geography, The University of Colorado at Boulder. These materials may not be copied to or issued from another Web server without the author's express permission. Copyright © 1999 Peter H. Dana. 423
Allocating customers to the sales representatives in charge! Once you have entered, reorganized or optimized your sales structures with RegioGraph or DISTRICT, customer to sales representative assignments usually have to be modified and adapted. We show you how you can make quick and intelligent new attributions and how you can export these into your customer data base for further use. 22
Automated Airphoto Orthorectification and Mosaicking in Modeler Geomatica 10.3 introduces new algorithms in the Visual Modeler interface to facilitate fully automated AirPhoto Orthorectification and Mosaicing workflow. New algorithms include CAMIMPORT, CAMEXPORT, AUTOFID, EOIMPORT, EOEXPORT, GCPIMPORT, CHIPEXT, RAW2CHIP and APMODEL. 57
Coordinate Systems This overview of coordinate systems for georeferencing provides a brief description of local and global systems for use in precise positioning, navigation, and geographic information systems for the location of points in space.
There are many different coordinate systems, based on a variety of geodetic datums, units, projections, and reference systems in use today.
296
Displaying a Map Learn how to build a simple Flash client using the ResponseMX Flash Components and ActionScript API. 125
FME Product Tutorial One of the best ways to get up to speed with FME is to download the FME Product Tutorial: 88
FME Workbench Introduction Product specialist Ryan Cragg introduces the FME Workbench. 43
FME Workbench Windows Product specialist Ryan Cragg covers some of the different Windows in FME Workbench. 14
Generating Territories The purpose of Area Planning is to provide the market with optimum sales services. In this example, territories are balanced off by population numbers, but sales, workload etc. could also be used as the basis. 41
Geodetic Datum These materials were developed by Peter H. Dana, Department of Geography, University of Texas at Austin, 1995. These materials may be used for study, research, and education in not-for-profit applications. If you link to or cite these materials, please credit the author, Peter H. Dana, The Geographer's Craft Project, Department of Geography, The University of Colorado at Boulder. 99
Geomatica 10.3 Programmable Dongle Floating License Server Installation The purpose of this tutorial is to provide you with a friendly and easy to follow step-by-step guide for the programmable dongle floating license server installation of PCI Geomatica 10.3, along with client installations. This tutorial will be periodically updated to include troubleshooting tips. 21
Geomatica 10.3 Stand Alone Installation The purpose of this tutorial is to provide you with a friendly and easy to follow step-by-step guide for the stand alone installation of PCI Geomatica 10.3. 5
Getting To Know ArcGIS Desktop 10 I have made a video-playlist covering the book "getting to know arcgis desktop" as I love GIS. So in this playlist you will have a sneak into the world of ArcGIS Desktop. Stay tuned as I am producing more and more GIS-related videos here: http://youtube.com/ricckli 155
GIS Tutorial A GIS is a computer system capable of capturing, storing, analyzing, and displaying geographically referenced information; that is, data identified according to location. Practitioners also define a GIS as including the procedures, operating personnel, and spatial data that go into the system. 599
Global Positioning System GPS is funded by and controlled by the U. S. Department of Defense (DOD). While there are many thousands of civil users of GPS world-wide, the system was designed for and is operated by the U. S. military.
GPS provides specially coded satellite signals that can be processed in a GPS receiver, enabling the receiver to compute position, velocity and time.
131
How to Assign Postcode Areas to Administrative Districts You are faced with the task of restructuring your sales territories from administration level to postcode level? Postcode districts and adminstrative districts often overlap. We show you how the data can be transferred into RegioGraph and DISTRICT without any problems. 35
How to Create Maps for the Internet with HTML Export RegioGraph and DISTRICT provide the option of using HTML Export to create maps with internet capability which can then be used to send a map per e-mail or to build a company website. We show you how to use the HTML Export to suit your purposes. 154
HyperXpress Tutorial Series - Using HyperXpress to print files on Disk Lesson 2 : The printer definition created is used when printing using the Windows Printer Interface product. This method allows HyperXpress to be used from within any Windows application. The shortcuts are used for accessing the features of the File-Based GUI for using HyperXpress to process disk files. Using HyperXpress as a Windows printer is covered in a separate tutorial. This tutorial covers the file-based GUI interface. 11
HyperXpress Tutorial Series - Using HyperXpress to print from your Windows Application Lesson 1 : The basics of printing using HyperXpress can be described in these simple steps. Each step is presented in detail in the following pages with illustrations showing you what you should expect to see on your screen. The basic steps for printing with HyperXpress are: 7
HyperXpress Tutorial Series - Viewer Features & Tricks Lesson 3 : The HyperXpress Viewer contains many features designed to provide a powerful tool kit for helping to ensure that you get the plot that you wanted. See the following pages for examples on how to use the viewer to: 21
Introduction--What Is GPS? The Global Positioning System (GPS) is a space age navigational system that can pinpoint your position anywhere on the globe, usually within a few yards or meters. This amazing technology is available to everyone, everywhere, day and night, and best of all, at no cost for use of the navigational data. GPS uses a constellation of 24 satellites in precise orbits approximately 11,000 miles above the earth. The satellites transmit data via high frequency radio waves back to Earth and, by locking onto these signals, a GPS receiver can process this data to triangulate its precise location on the globe. 73
Manual Mosaicking Manual mosaicking allows you to mosaic individual image files or edit unsatisfactory images and/or cutlines in files that were created using the automatic mosaicking tool. The following tutorial outlines the basic steps involved in mosaicking a series of orthorectified images using the new manual mosaic tool in OrthoEngine V10.3 58
Map Forms Builds on the application developed in Tutorial 2 - Map Navigation Tools, adding a history form and a layer control. 28
Map Navigation Tools Add map navigation tools to the Flash application. 31
Map Projection Map projections are attempts to portray the surface of the earth or a portion of the earth on a flat surface. Some distortions of conformality, distance, direction, scale, and area always result from this process. Some projections minimize distortions in some of these properties at the expense of maximizing errors in others 79
Multiple Signature Generator (CSG2) and Maximum Likelihood Classifier (MLC) Model CSG2 or Multiple Signature Generator is a new algorithm introduced in PCI Geomatica 10.3. CSG2 is an enhancement of our older CSG algorithm (Classifier Signature Generator). With the introduction of CGS2 algorithm, CSG will be retired in future versions of Geomatica. 6
Orthorectifying AVNIR-2 Data Rigorous and RPC Modeling AVNIR-2 stands for Advanced Visible and Near Infrared Radiometer Type 2. It is a successor of AVNIR-1 and is one of the three sensors on-board the ALOS satellite; the other two sensors are PRISM and PALSAR. The main improvement in AVNIR-2 over AVNIR-1 is the image resolution. While AVNIR-1 produced 16 meter resolution images, AVNIR-2 is capable of producing 10 meter resolution multi-spectral images. 19
PlanTracer Tutorial Tutorials 23
Presentation Mode in RegioGraph and DISTRICT RegioGraph and DISTRICT have a presentation mode, which enables you to present your maps as a slide show. Your maps will be displayed full-screen. Therefore, the presentation mode is ideal for conferences and meetings! 5
Remote Sensing Tutorial Remote sensing is a technology used for obtaining information about a target through the analysis of data acquired from the target at a distance. It is composed of three parts, the targets - objects or phenomena in an area; the data acquisition - through certain instruments; and the data analysis - again by some devices. 306
ScanDEX Database Basic training on design, creation, use, and maintenence of a ScanDEX Database. 12
Transferring Data The updating of market data stocks involves the transfer of data from old stocks to new ones or conversion from administrative to postal regional levels. The numerical and textual values of a territory are simply distributed in proportion to the area. 13
VP HybridCAD ® V9 This Tutorial has been designed to guide and teach you how to use the numerous functions of VPHybridCAD products, including the VPHybridCAD Demos. We refer to the Reference Manual for detailed descriptions of all available functions. Also, the content of the Tutorial and Reference Manuals are available online in the software (help and tutorial). 12
VP map Series V2 THE Perfect Bridge From Scan To GIS This tutorial has been organized to help you to quickly find operation terms, commands, and description of functions and to supply you with brief, but sufficient explanations. The tutorial applies to the following VP products: VPmap and VPmap pro. The icon at the top on each page indicates the product(s) to which the information and/or commands apply. If specific commands on a page are limited to other products or product groups this is marked with a corresponding icon at the corresponding command. 9
WiseImage Support This is mainly designed for those who want to get started working with WiseImage 5 ( WiseImage 5 for AutoCAD ) programs . The information presented here can also be used by experienced users as help 13
Total 37 links listed (include in sub-categories).

DigitalGlobe

Jobs
HPSA Designations and GIS Manager for Virginia Department of Health at Richmond, VA
Senior Sales Representative for Intergraph Corporation at New York, NY
GIS Analyst for Performance Software at Phoenix, AZ
Geographic Data Manager for Blue Raster at Arlington, VA
Engineering Program Managers for D E Shaw Research at New York City, NY
Head of Engineering Program Management for D E Shaw Research at New York City, NY
Upcoming Events
2014 Trimble Dimensions User Conference at Las Vegas Nevada - Nov 3 - 5, 2014
GeoDATA 2014 Glasgow at Glasgow Science Centre Glasgow United Kingdom - Nov 4, 2014
ACM SIGSPATIAL Cup 2014 at Dallas TX - Nov 4 - 7, 2014
ACM SIGSPATIAL GIS 2014 at Dallas TX - Nov 4 - 7, 2014
Senior Sales Representative
GIS Analyst
CADalog.com - Countless CAD add-ons, plug-ins and more.
HPSA Designations and GIS Manager



Click here for Internet Business Systems © 2014 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and EngineeringEDACafe - Electronic Design AutomationTechJobsCafe - Technical Jobs and Resumes	MCADCafe - Mechanical Design and EngineeringShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy