Mapping Asia’s Biggest Copper Mine Using a UAV

In early May 2018, the Czech company UpVision used an unmanned aerial vehicle (UAV) to map a copper mine in Mongolia – the largest in Asia – as part of an ongoing Czech geological expedition at the site. More than 10 square kilometres of the mine and its surroundings were mapped using the MaVinci Sirius unmanned aircraft.

UpVision has been using the MAVinci UAV for similar missions for more than five years, in particular due to its suitability for flying in difficult terrain, manual flight mode and the possibility to repair the UAV directly on site if necessary.

Before take-off unmanned aircraft

The main geospatial output of the mapping activities was a detailed digital surface model (DSM), which serves primarily for geological purposes, in the form of a textured cloud comprising several hundreds of millions of points in a local coordinate system. Another output was a current orthophoto in different image resolutions. Since the hilly terrain made it difficult to create flight plans for the UAV to map in terms of overlapping and image resolution, the entire mine was mapped in high density by conducting multiple mapping flights at different heights and with different image resolutions to ensure detailed mine coverage.

Small UAV for mapping mine walls

“Mapping took place in challenging terrain with large elevations and at an altitude of about 1,400m. In the location near the town of Erdenet there is a strong wind and a lot of dust during the day. In terms of the weather, there can be strong temperature fluctuations in early May, when it is not unusual for snow to fall in the morning and for temperatures to be above 20°C the next day. That is why it was necessary to adapt the flying in the early morning and in the evening hours, and to divide it into several missions,” says Jakub Karas, co-owner of UpVision.

Furthermore, a small UAV (DJI Mavic) was used to map vertical walls for the purpose of creating geological measurement drawings.

In this case, despite the weather conditions, UAV mapping enabled the rapid capture of the necessary geospatial outputs in high density and quality, allowing for many other uses in the future.

This entry was posted on Wednesday, May 23rd, 2018 at 11:12 am. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.