Open side-bar Menu
 GISCafe Voice

Archive for the ‘data’ Category

Trimble’s Rapid Positioning System Simplifies Layout for Contractors

Thursday, February 5th, 2015

David Burczyk, Segment Manager Field Solutions at Trimble, spoke with GISCafe Voice about the the company’s Rapid Positioning System, that includes Trimble RPT600 Layout Station, for layout of points and to capture them as-built measurements, and Trimble Field Link 2D software that runs on a performance tablet to control the layout station.

Trimble_Rapid_Positioning_System_(640x479) (more…)

GISCafe Voice Techno-Predictions for 2015

Tuesday, January 27th, 2015

In the United States alone, geospatial data and services are estimated to generate $1.6 trillion annually.

Skybox Imaging

Skybox Imaging

(more…)

Startup AllSource uses commercial satellite imagery to monitor North Korean political prison camps from space

Wednesday, January 14th, 2015

Chuck Herring, formerly of DigitalGlobe, is one of three founders (Joe Bermudez and Stephen Wood) of the startup company Allsource Analysis Inc.  (ASA) Located in the heart of Colorado’s Front Range geospatial hub, commercial imagery intelligence and analytics products AllSource Analysis Inc. (ASA) is establishing itself as a company to address specific analysis and monitoring challenges using commercial satellite imagery and remote sensing.

A representative image of the work done by AllSource in North Korea

A representative image of the work done by AllSource in North Korea

(more…)

IMAGINiT on “The challenge of managing big datasets”

Friday, January 9th, 2015

At Autodesk University 2014 held in Las Vegas in December, Joe Hedrick, Infrastructure Solutions Team Manager, IMAGINiT Technologies, spoke with GISCafe about how projects in general are becoming bigger, along with ever-increasing use of reality capture. IMAGINiT  is a provider of software, training, support and services to design and engineering companies and Autodesk Authorized Reseller and Autodesk Training Center.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

“Bigger datasets, more partners and consultants are involved,” said Hedrick. “We continue to see a huge increase in people looking for ways to manage data. We’ve had several contracts with the army where they are managing everything from facility drawings to various documents and spreadsheets. In addition, private and commercial engineering and architectural firms are looking for ways to share data and projects.”

IMAGINiT will sometimes have to build tools inhouse, but mostly they use Autodesk Vault for integrations and data storage. “Commercial firms may want to tie into accounting, and we have integrations into some of the popular accounting packages out there,” said Hedrick. “We’re in the middle of a big one for the government. We are using our system and then programmatically writing to the data tables that they have in place.”

A cheaper solution to integration and managing data is Autodesk’s Fusion A360, said Hedrick. “I think it will change how we manage data. It’s going to integrate very nicely into the design platforms and apps.”

With data management, Hedrick said the biggest challenge is the size of the models. “How do you share a model that could be several gigabytes? With one of the army projects, we’re talking about 3 TB of data. How do we share that information? With pure sizes, there’s not a great way to share that amount of information. This becomes particularly difficult when you incorporate scanned data into it.” Hedrick said it used to be hard to find anyone to embrace the cloud but now the government is beginning to embrace it and the security is better. The cloud holds a lot of promise for managing large datasets and is being offered as a service in the InfraWorks 360 Model Builder cloud service.

(more…)

Happy New Year and 2015 GISCafe Voice Editorial Calendar!

Tuesday, January 6th, 2015

Happy New Year from GISCafe!

planets (more…)

GIS and CAD converge: interview with Autodesk’s Paul McRoberts

Monday, December 8th, 2014

In an interview with vice president, Infrastructure at Autodesk, Paul McRoberts at Autodesk University 2014, GISCafe Voice discussed the convergence of GIS and CAD technologies at the company.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

(more…)

GameSim announces CRADA with the NGA

Thursday, December 4th, 2014

The notion of gaming and geospatial coming together has been explored for some time. Gaming simulation and GIS software provider GameSim Inc. announced a Cooperative Research and Development Agreement (CRADA) with the National Geospatial-Intelligence Agency. (NGA). This agreement will give credence to GameSim’s 3D environment with standards and data created and validated by the NGA.

In 2013, GameSim, ranked by Inc. Magazine as one of the 500 fastest growing companies in the U.S., introduced an innovative software product, Conform (gamesim.com/conform), which generates a 3D representation of an environment from GIS data (vectors, elevation, and imagery) in near real-time. The integrated scene can be viewed in both 2D and 3D, or exported, into other run-time formats.

GameSim was interested in furthering their process of fusing together a single 3D environment by supporting additional data products (e.g., LiDAR, OTW video, and thermal video), to create a more accurate and rich 3D environment, while still maintaining near real-time performance. GameSim had previous experience working with these formats. The agreement with NGA through CRADA will provide the company with proper standards and data validated by NGA. In addition, GameSim and NGA will research the creation of a low bandwidth, browser-based visualization of that fused environment, according to GameSim company materials.

“We are creating a product that can fuse a variety of formats that adheres to established standards,” said Andrew Tosh, GameSim founder and president. “By collaborating with NGA it helps assure that GameSim produces a product that can meet the demands of the intelligence community, in terms of accessing their content and producing valuable visualizations.”

 

Thanksgiving told in maps

Wednesday, November 26th, 2014
Map of Thanksgiving Dinner, by Grant Snider, Incidental Comics

Map of Thanksgiving Dinner, by Grant Snider, Incidental Comics

Where Did your Thanksgiving Dinner Come From? (Story Maps)

Where Did Your Thanksgiving Dinner Come From? Map (Esri Story Maps)

Where Did Your Thanksgiving Dinner Come From? Map (Esri Story Maps)

(more…)

TerraGo releases OpenGeoPDF technology

Tuesday, November 25th, 2014

In a conversation with George Demmy, CTO of TerraGo, GISCafe Voice learned about the release of OpenGeoPDF technology, now available with TerraGo Publisher for ArcGIS, TerraGo Composer and TerraGo Toolbar.

OpenGeoPDF

OpenGeoPDF

(more…)

Special GISCafe Coverage: 3D Cities: Envisioning Communities of the Future

Friday, November 21st, 2014

Cities worldwide are charged with the same challenge: that of creating or retrofitting sustainable, intelligent infrastructure. Cities need the best in design, geospatial, visualization and analytical tools to realize a viable and intelligent city design. 3D City design is architectural design times thousands, plus it must have the ability to be interwoven with other surrounding infrastructure and foster an urban conversation.

CyberCity 3D

CyberCity 3D

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise