Open side-bar Menu
 GISCafe Voice

Archive for the ‘3D PDF’ Category

GISCafe Voice Industry Predictions for 2021 – Part 4

Friday, February 19th, 2021

Thematically, this week’s group of industry predictions can be boiled down to one topic: delivering the data that people need, in a format that they can understand to enable them to make the best possible evidence-based decisions quickly and confidently.

 

(more…)

GISCafe Special Report: Digital Twin Technology Offers a Mirror Image for Productivity of the Future

Friday, March 22nd, 2019

Digital Twins – are they taking the technology world by storm? IDC recently noted that by 2020, 30% of global 2000 companies will be using data from Digital Twins to improve organizational productivity by as much as 25%. While it is not quite there, Gartner predicts the Digital Twin will reach the “Plateau of Productivity” within 5 to 10 years.

According to the 2018 Gartner Hype Cycle, Digital Twin is a trend that is now approaching the “Peak of Inflated Expectations” and is estimated to hit the “Plateau of Productivity” within 5 to 10 years. Image courtesy of Gartner, Inc.

(more…)

Census Data Informs Allocation of Resources Around the Globe with the New Hexagon HxGN Smart Census

Thursday, October 25th, 2018

 As our U.S. Census nears its next collection in 2020, Hexagon Geospatial takes on the globe with its latest Census launch that takes into account the UN sustainable development goals.

(more…)

GISCafe Editorial Calendar 2018

Thursday, November 30th, 2017

GISCafe Editorial Calendar 2018*

 

 January:

01/23-01/25 Esri Geodesign Summit Redlands, CA

Editorial topics:

  • Top Geospatial Predictions for 2018
  • 3D Cities and Geospatial

February:

Editorial topics:

  • Small Sats Update
  • Current Events

March:

23/20-3/21 Esri Federal GIS Conference 2018, Washington D.C.

Editorial topics:

  • Esri Federal Conference Coverage
  • Current Events

Robert Cardillo, the director of the National Geospatial-Intelligence Agency, speaks to the GEOINT 2017 symposium June 5. Credit: USGIF

(more…)

GIS Day 2017 is for Everyone

Wednesday, November 15th, 2017

Dr. Joseph Kerski, Ph.D., GISP, Education Manager for Esri, spoke with GISCafe Voice about GIS Day events and his trip to University of Central Florida (UCF) to participate in GIS Day 2017 there. Coordinating the UCF event is Dr. Timothy Hawthorne, Assistant Professor of Geographic Information Systems, Principal Investigator, NSF Citizen Science GIS REU Site for UCF.

(more…)

Newscycle Through the Eyes of Maps

Wednesday, October 4th, 2017

This week the news hit close to home: my son was working in the Manderley Bay Hotel when the shooter opened fire on Route 91 Harvest festival in Las Vegas outside. He was safe thank God, but terribly shaken by the event as visitors poured into the hotel with panicked stories and later, the hotel was in lockdown for several hours. The level of fear and panic generated by this event was hard to contain as most people didn’t know what was happening and heard only shots  coming from up high.

Rather than rehashing the news here, which everyone has read already via TV or popups on their phones, I’m going to blog through maps that show factual information on this and other recent disasters that have hit close to home, both manmade and natural. Maps put events in perspective, take one incident out of isolation and place it in context.

From The Guardian: The United States owns way, way more guns per capita than the rest of the world. And the best research on gun violence suggests that’s probably contributing to our homicide problem — as exemplified by Sunday night’s horrific shooting.

Here’s a map of firearm ownership around the world, using 2012 data compiled by The Guardian. The United States has nearly twice as many guns per 100 people as the next closest country, Yemen — 88.8 guns per 100 as opposed to 54.8 in Yemen:

We have also the aftermath of the devastation from three hurricanes making landfall in the U.S., Mexico and the Caribbean, including Puerto Rico, U.S. Virgin Islands, Barbuda and others, plus an earthquake in Mexico. Fortunately maps are abundant in the GIS world for tracking and analysis of the events, plus disaster recovery efforts.

In many parts of the world people do not have physical addresses, nor defined property boundaries. The importance of identifying location by addressing/location with just three words is brought to light in this video by what3words:

This Esri Interactive Map presents the enriched Shakemap of the M 7.1 Earthquake near  Puebla, Mexico to show the potential impact to population and households in the area.

Clicking on the shaded areas allows you to view the impact for that intensity:

Orange (very strong): 447k total population; 114k total households

Yellow (strong): 10.2m total population; 2.6m total households

Green (moderate): 8.7m total population; 4.8m total households

Blue (light): 43.1 total population; 10.8m total households

Esri Disaster Response – Hurricanes & Cyclones

While there are still many places that are not on the radar of technology after catastrophic events such as hurricanes, cyclones and earthquakes, map technology may be used to locate victims and learn where to provide desperately needed services. From company materials: Esri is supporting organizations that are responding to hurricane/cyclone disasters with software, data, imagery, project services, and technical support. If you are in need of software or support, complete the Request Assistance form on the webpage above. All requests should be justified in the message section of the form and are subject to approval.

Web mapping applications related to Hurricane Maria provided from the Esri Disaster Response Program and agencies involved in response to and monitoring of the hurricane. There is also an identical page for Hurricane Irma.

CrowdRescueHQ is an organization powered by volunteers, who gather data from social media to support rescue efforts and victims of natural disasters.  This CrowdSourceHQ Observations dashboard is updated every half-minute and displays latest observations reported in Puerto Rico related to Hurricane Maria.

Woolpert Hurricane Irma maps

Woolpert, working under two separate contracts that had very technically different requirements, collected and posted high-resolution, before-and-after imagery of areas in Florida affected by Hurricane Irma to assist with flooding and damage assessment.

From company materials: Miami-Dade County contracted with Woolpert for post-storm imagery as Hurricane Irma approached, while Woolpert’s work with the Florida Department of Transportation (FDOT) is part of an existing five-year, statewide contract for emergency mapping services.

“Miami-Dade wanted imagery from after the event, documenting damage assessment, while FDOT wanted to see how high the water got at the peak of the flooding to gain current flood conditions,” Woolpert project manager Mike Zoltek said. “For FDOT, we captured 1,000 square miles of imagery along the St. Johns River in a single day as the water was cresting. The imagery was collected across four counties—St. Johns, Duval, Putnam and Clay—from Palatka to Jacksonville.”

The FDOT project is complete, while the Miami-Dade project continued as weather allowed throughout the week.

The collections have included 6-inch and 1-foot ground sampling distance (GSD) orthoimagery. The smaller the GSD, the higher the image resolution. As part of this process, Woolpert captured aerial imagery, processed the data, paired it with comparable imagery collected prior to the hurricane, delivered it to clients and posted it on a before-and-after online slider for use by anyone affected by the disaster.

The resulting online maps, aggregated with data from the National Oceanic and Atmospheric Administration (NOAA) and Google, enable viewers to look up an address, navigate to an area of concern, and zoom in and out.

Woolpert, whose planes had just returned from mapping the devastation in Houston after Hurricane Harvey when contacted by Miami-Dade, credited the county for preparing for recovery efforts before the storm hit.

Two Koreas Story Map

Two Koreas

Tensions between the U.S. have escalated rapidly, with a lot of chest thumping and threats of nuclear war. The conflict is not new, and has roots reaching all the way back to World War II. It is a conflict over control of the Korean Peninsula, pitting the North against the South.

While the Korean War of the early 1950s never formally ended, its aftermath has created starkly divergent worlds for those living on either side of the north-south divide. This Esri Story Map takes a look at life in the two Koreas; how such a night-and-day difference came to be; and offers some analysis of where the crisis could go from here.

Share this map:

https://arcg.is/0yGri0

 

 

 

 

Bentley Year In Infrastructure 2016 – Integrating GIS and BIM

Thursday, November 3rd, 2016

It’s difficult not to be inspired when attending the Bentley Year In Infrastructure Conference, with so many talented professionals gathered to show off their infrastructure projects.

Innovation in Rail and Transit Winner: Bandedamark - New Line, Copenhagen-Ringsted, Copenhagen Capital Region, Denmark

Innovation in Rail and Transit Winner: Bandedamark – New Line, Copenhagen-Ringsted, Copenhagen Capital Region, Denmark. Image Courtesy of Bentley Systems

(more…)

SmartBetterCities Released New Version of CloudCities Virtual Reality Tool

Wednesday, October 26th, 2016

In its first version, SmartBetterCities’ released CloudCities virtual reality tool, that can be imported from CityEngine, SketchUp and GoogleEarth. CloudCities is an online platform for hosting, sharing and visualizing smart 3D city models. The models are based on OpenStreetMap, are lightweight and used mostly by mobile users, with an easy drag-and-drop workflow. It was used in a development review at Harvard University urban campus in Kindle Square, where building sensors and monitoring were integrated into visualization.
Screen Shot 2016-10-21 at 8.22.03 PM
 CloudCities’ newest release includes a massive 3D format support plus the marriage of BIM and GIS data in its 3D Mash-Up feature, plus support for numerous well-known GIS and BIM formats. CEO and co-founder Antje Kunze talked to GISCafe Voice about this exciting new release.
(more…)

From the Exhibit Hall: GEOINT Symposium 2016

Thursday, May 26th, 2016

The GEOINT Symposium 2016 attracted a great many exhibitors all focused on providing excellent resources for the geo-intelligence community. Tools for mobility, analytics, cloud, open source, business and location intelligence, moving data back and forth between unclassified and top security listings, and much more abound in this showcase of commercial offerings.

IMG_5117 (more…)

How to Integrate Data Capture, BIM, CIM, GIS and CAD

Wednesday, May 4th, 2016

At an industry session held at SPAR3D 2016 in April in The Woodlands, Texas, Steve Hutsell, Chief, Geospatial Section U.S. Army Corps of Engineers (USACE), Seattle District, and Lou Bush, Director of Survey, Bowman Consulting Group, gave a talk entitled: “Integrated Data Capture, BIM, CIM, GIS and CAD – Owner and Industry Perspectives on Products, Processes and Policies for Informed Decision Making.”

CIMmodel (more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise