Open side-bar Menu
 GISCafe Voice

Archive for the ‘handhelds’ Category

Census Data Informs Allocation of Resources Around the Globe with the New Hexagon HxGN Smart Census

Thursday, October 25th, 2018

 As our U.S. Census nears its next collection in 2020, Hexagon Geospatial takes on the globe with its latest Census launch that takes into account the UN sustainable development goals.

(more…)

Lightweight Rugged RTK Tablet from DT Research for Military and Forensic Mapping

Friday, October 12th, 2018

What the rugged tablet market has been waiting for: scientific-grade accurate measurements on a tablet for those engaged in non-land surveying work. These rugged tablets can deliver centimeter-level measurement accuracy faster and easier than using conventional land surveying equipment and at a fraction of the cost – which, in turn, improves safety for first responders during collision reconstruction, natural disasters and crime scenes, according toKevin Tsai, senior product engineer for DT Research. The combination of accurate measurement, small size, and ability to complete other functions on the same device makes these tablets extremely flexible and efficient.

DT Research, designer and manufacturer of purpose-built computing solutions for vertical markets, announced the DT372AP-TR Rugged RTK Tablet, a lightweight military-grade tablet that is purpose-built with Real Time Kinematic (RTK) used to enhance the precision of position data derived from satellite-based positioning systems, according to company materials. This tablet enables 3D Point Cloud creation with centimeter-level accuracy – that meets the high standards required for scientific-grade evidence in court.

(more…)

Complete and Accurate U.S. Census is the Goal for 2020

Thursday, September 20th, 2018

While it’s still early for most of us to be thinking about the 2020 Census, it is not too early for the U.S. Census and most technology providers of Census software to be considering how to prepare.

Michael Ratcliffe, Asst. Division Chief, Geographic Standards, Criteria, Research, and Quality, Geography Division, US Census Bureau, spoke with GISCafe Voice about what the 2020 Census requires, and the Local Update of Census Addresses (LUCA).

With regard to the 2020 Census, an accurate address file for each state is essential, otherwise each state could lose millions of dollars in federal funding. It can also affect state budget obviously, and number of seats in Congress (determined by count).

What are ways the Census can ensure everyone gets counted in 2020?

  • Our goal is a complete and accurate census.
  • An accurate count helps determine how the nation allocates tax dollars to pay for services used by the entire local population — citizens and noncitizens alike and accurate data are crucial for determining how many congressional seats each state gets.
  • We need communities to help us spread the word that all census responses are confidential and we will continue working with trusted voices in local communities to encourage people to participate.

What are any new requirements for the 2020 LUCA program for identifying individuals and how do they contrast with past requirements?

Will townships, tribes, cities and counties submit their Census figures to the state or submit them independently?

  • The Census is self-response only. Census numbers are not compiled by any organization other than the Census Bureau. Residents should provide their 2020 Census responses to the Census Bureau only.

Will citizenship status be included in this collection?

(more…)

Coming Soon: Site Scan Esri Edition

Wednesday, September 12th, 2018

3DR, the creators of Site Scan, announced recently it has entered into a partnership with Esri, to develop Site Scan Esri Edition, a customized version of its full end-to-end Site Scan product. Esri product manager for Drone2Map for ArcGIS and Full Motion Video Cody Benkelman spoke with GISCafe Voice about the upcoming development and the Site Scan Esri Edition.

“Site Scan Esri Edition is an app focused exclusively on providing flight planning,” said Benkelman. “something Esri does not provide, and our customers have been requesting.”

The Esri Site Scan Edition app is designed to be used with Esri’s Drone2Map for ArcGIS software for post processing in ArcGIS, and full drone project mission planning for transferring drone captured data into the Esri ArcGIS ecosystem. There is also drone processing capability within ArcGIS Pro called “orthomapping.” Users of Site Scan Esri Edition will also be able to process data in ArcGIS Pro through the orthomapping workflow.

Site Scan Esri Edition will allow you to do the flight planning and it will connect directly to ArcGIS Online, and can work well for the enterprise user as many organizations already have a lot of their own data available on ArcGIS Online.

“They’ll have their own field boundaries, site boundaries, vectors along power lines or other linear features, and much of that data will already be accessible on ArcGIS Online,” said Benkelman. “Site Scan Esri Edition will allow those users to connect directly to ArcGIS Online via the internet. They can drop ArcGIS Online layers directly into the flight planning process.”

Benkelman said that Site Scan Esri Edition is good for both enterprise users or those who are only using a drone once or twice a year. Through ArcGIS Online you have access to a vast amount of existing data, such as the USDA NAIP imagery, Landsat and Sentinel 2 imagery, FAA flight maps, weather data, worldwide terrain data, etc. Users can also access custom data layers from the user’s FedRAMP authorized ArcGIS Online organization account as base and reference data for their drone flight planning mission.

In contrast, “Many ArcGIS users worldwide are increasing their use of the Site Scan existing product as ArcGIS is the end destination for a lot of drone data, so even if they’re using different drone hardware or different flight planning applications, a lot of that data ends up in ArcGIS Online or behind an organization’s firewall as proprietary data.”

(more…)

GISCafe Voice Newsmix

Thursday, September 6th, 2018

News this week takes a look at satellite imagery and machine learning for agricultural intelligence products, Dronecode platform-based products, traffic management using intelligent analytic rerouting, artificial intelligence and analytics, and AI and machine learning.

Google Driverless Car

The first two partnerships feature insights from the sky to earth. Herndon, Virginia-based Radiant Solutions, a Maxar Technologies company (formerly MacDonald, Dettwiler and Associates Ltd.), and TellusLabs, a satellite imagery and machine learning company, announced a partnership to offer agricultural intelligence products to provide insight on the world’s food supply, for the remainder of the Northern Hemisphere’s 2018 agricultural growing season and into the start of the Southern Hemisphere’s growing season. Those stakeholders such as food companies, government agencies and commodity traders who need a better understanding of the world’s current crop conditions and end of season expectations will benefit from this alliance.

Radiant Solutions’ Weather Desk™, an information platform enabled by advanced analytics applied to weather data, provides daily agricultural insights into how weather conditions are impacting agricultural markets. TellusLabs’ Kernel, enabled by machine learning applied to satellite imagery, provides insights into crop yields and agricultural forecasting. The offerings combine to deliver users an information to help them leverage the power of advanced analytics applied to persistent and pervasive weather and imagery data to derive insights into the agricultural supply chain dynamically and at a global scale.

3DR and Yuneec, two founding members of the Dronecode Software Consortium, announced a U.S.-headquartered joint venture to bring Dronecode platform-based products to market. The joint venture, which will operate as 3DR Government Services, will focus on serving the security and open platform needs of U.S. government customers and their vendors in the construction and engineering industries.

3DR Government Services will combine Yuneec’s hardware expertise and manufacturing scale with 3DR’s software. The first product from 3DR Government Services is the Yuneec 3DR H520-G, which is being unveiled at the InterDrone Conference in Las Vegas this week.

From traffic in the sky to traffic on earth, the following research study and enterprise data platform provider focus on AI and analytics and in the last case, takes into account blockchain technology.

(more…)

New Resource Center Hazard HQ from CoreLogic Offers Public Access to Analysis and Data Insights

Wednesday, August 15th, 2018

CoreLogic®, a leading global property information, analytics and data-enabled solutions provider, recently announced the launch of its new publicly-accessible risk information resource center, Hazard HQ(tm). This new information hub will offer individuals, media and companies high-level analyses and up-to-date data insights on the immediate risks natural catastrophes pose to properties across the country.

The latest risk summary for Hazard HQ focuses on the ongoing California wildfires. As comprehensive risk assessment needs increase alongside growing economic losses from natural catastrophes, Hazard HQ offers a high-level risk perspective for individuals and companies who wish to understand how hazards like earthquakes, floods, hurricanes, severe convective storms, wildfires, wind and volcanic activity can impact their regions.

Senior leader of content and strategy for CoreLogic, Maiclaire Bolton Smith, spoke with GISCafe Voice about the new resource center and how it is dedicated to offering catastrophe insights about events while they are happening.

Does Hazard HQ take in citizen information?

No, it focuses on information from CoreLogic. Corelogic can provide insight and information, whether wildfire, hurricane, earthquake or flooding, and offers insights on number of properties that could be at risk, or on an area that could be impacted and the home value that could be lost. No information is pulled from citizens. It’s our opportunity to share information with others to help them protect themselves and be able to restore from financial catastrophe.

It really evolved as a way for us to share information easily.

We’ve had all these devastating wildfires this summer already. We always try to learn from the events that have happened. We’ll always be providing more information on research. For example, with regard to the wildfire that happened in Sonoma County, California last year that impacted Santa Rosa, over the past six months we’ve done a lot of research looking at the reconstruction from that wildfire and the state of the homes being rebuilt and looking at some of the insurance impacts and implications from that event happening. An event doesn’t end when an event ends, it’s a long process afterwards to really recover from it, so we will continue to share more information on an ongoing basis as we continue to research events.

How do you expect risk analysis you’ve done last year is going to impact or help in the assessment of the damage of the Mendocino fire, as an example, right now?

The biggest factor is that it brings awareness to the impact that these devastating events do have. We hear about the hundreds of thousands of acres burned, but a lot of times the fires are burning in remote areas and there are not a lot of properties at risk. It’s devastating to see the area burned, but what we want to focus on is bringing awareness to insurers and other people about where there are homes and properties at risk, and focus on the human aspects of it. What people can take away from our previous research, is

  1. Being prepared for hazards that could happen, whether it be a flood, earthquake, hurricane, etc. We’re prone to disasters all the time in various parts of the country.
  2. Awareness of the events that can happen, and our main goal is to work with insurance companies and help them understand what properties are valued at to be able to insure properties properly.
  3. The general public needs to know they need insurance for a lot of these hazards. Insurance can really help them recover from events when they do happen. Hopefully they won’t be impacted but if they are, to know their risk and to be able to accelerate their recovery is a huge bonus.

Say a customer is obtaining insurance for things they expect but what about these events that happen way beyond anyone’s expectations?

Unfortunately, those rare events are the wild card that are really beyond planning scenarios. I’m actually a seismologist by training and I spend a lot of time training people to know their earthquake risk. I always say the number one thing people can do to prepare for an earthquake, is believe that it can happen, and that’s the same with all disasters. The possibility is there that it may occur. These are hard for people to conceptualize and plan for.

At CoreLogic we do risk modeling where we look at the range of events that can happen – the more common events to the very extreme events. That’s the information we provide to insurance companies, including what could the worst-case scenario even look like.

I have spoken to CoreLogic many times. In the past the company has said with the fires we’re expecting an increase in losses to homes because people have built closer to forests, and forests are not cleared as often, we run the higher risk.
(more…)

School Safety GIS Ups the Ante with Social Media and Georeferenced Floor Plans

Thursday, August 9th, 2018

The U.S. has been rocked by tragic school shootings and other violence over the past years, with very little deterrent to this increasing trend.

At the Esri User Conference 2018, a talk entitled “School Safety GIS – Survey123” was conducted by GIS specialist for Detroit Public Schools, Randall Raymond, and Officer Adele Gardner, Detroit Public Schools Community District Police Department, who outlined the work they have been doing over the past year to use social media and other geospatial tools to detect, analyze and visualize potential dangers to kids in schools.

“We were able to create a social media mapping feed that was out-of-the-box Esri available and discovered while it did what we wanted it to do in some ways, it was very manual and labor intensive,” said Raymond. “You needed someone to constantly be looking at the feeds that were coming in. We partnered with Esri and they suggested a company named DataCapable, that was doing social media for event detection, event notification and event mapping for the power and gas industry. We figured it was the same for a big power company and they would be interested in what we’re doing. They retasked some of what their software does to give us more analytics and give us more understanding of potentially dangerous situations happening at schools by monitoring for specific events. We could use machine learning and artificial intelligence to go through messages and quickly determine the validity of them, confidence in them and decide if there is action that needed to be taken.”

Raymond retired from upper administration in the Detroit Public Schools in 2013 and has continued the work with the school system since that time, helping with high school programs and consulting with their police department. He works with Officer Gardner helping them to continue to learn to use their ArcGIS tools and do more strategic thinking about deployment of police resources.

The value of social media has been long recognized by Officer Gardner, who has extensive examples of problems with kids in Detroit Public Schools and social media being used to organize the meetings where kids to go to events in the city and rob people and steal from cars, etc. But privacy is obviously a very big issue, according to Raymond.
(more…)

DATAMARK Debuts DATAMARK VEP SaaS for GIS Data

Thursday, June 21st, 2018

Sandi Stroud, associate vice president, Public Safety GIS DATAMARK, spoke with GISCafe Voice about DATAMARK, the public safety GIS division of Michael Baker International, and the recent launch of DATAMARK DATAMARK VEP (Validate-Edit-Provision), its new software-as-a-service GIS solution that validates, edits and provisions GIS data. To solve incomplete or poor-quality GIS data challenges, DATAMARK developed DATAMARK VEP to provide highest levels of public safety GIS data completeness and accuracy in the nation’s nearly 5,000 public safety answering points. The new solution is for both current 9-1-1 systems and the transition to next generation 9-1-1 (NG9-1-1) systems and is augmented with GIS technical services and an expanded DATAMARK team that includes public safety and GIS professionals. NG9-1-1 is an initiative to update the 9-1-1 service infrastructure in the U.S. and Canada to improve public emergency response in a mobile society.

“This year Michael Baker formalized the public safety GIS division, grown into our own line of purposeful business within the company. And our staff has grown. But under DATAMARK we really are a suite of solutions and services. We have really built our team over the last six months to not just address GIS professionals but a lot of folks who have spent their entire careers in public safety and 9-1-1. And part of the reason for that is that we understand there’s a bit of translation that has to happen, depending upon whether we are working with a public safety or GIS client. Our staff is really involved in NG9-1-1 standards and participation in groups. Several of my staff including myself have helped author NG9-1-1 workshops for URISA. We launched that about three years ago at the GIS Pro conference in Washington, taught the workshop about twelve times since, and in fact we’re teaching the workshop at the Esri conference this year, so it’ll be free to conference goers.

We’re very focused on being able to be the GIS experts for NG9-1-1. In addition, we do offer comprehensive technical services, and then we also have solutions that are SaaS solutions. The approach we’ve taken is how can we take a product that helps a GIS stakeholder or data provider support the next gen 9-1-1 requirements, which is maybe a heavier lift than the normal business process they currently support. In addition to the solutions, we’ve also developed a service deliverable that we call a DATAMARK VEP. It allows us to help a 9-1-1 jurisdiction take a step back and look at a solution and really assess what it is they need to address in order to address their public safety or 9-1-1 solution.

What is the difference between traditional 9-1-1 and NG9-1-1?

The current 9-1-1 system – the process of getting the 9-1-1 caller to the right 9-1-1 center. You’ve dialed the 9-1-1 center and are waiting to talk to the dispatcher who sends you help. There is the process of identifying which center based on where you’re at. There is tabular location data that is used to take the location and do a database lookup, it’s not a geocoding exercise. Based on an attribute in that file, it determines where to send your call. In the 9-1-1 center you have your CAD dispatch center, you have a call taking system, and vehicle routing system.  All these can use GIS, but we’ve found it’s very inconsistently applied. Some do not use GIS in those systems, they maintain a separate spatial file within those systems. There are a lot of silos that currently exist between how GIS is used in the 9-1-1 center and the tabular data that is currently being used to decide what center a call goes to.
(more…)

Special GISCafe Coverage: Geospatial Data Providers and Services

Thursday, May 24th, 2018

Data providers abound in the GIS and geospatial industry. Choices range from mapping, built and natural terrain modeling, survey, GIS/LIS technologies, geospatial web, and asset inventory, mapping, geodetic and engineering surveying, photogrammetry, satellite imagery and real-time satellite data, remote sensing, aerial and ground-based LiDAR surveys, geographic and land information systems (GIS/LIS), 3D scanning, and spatial computing and analysis and much more.

Hamburg Port Rathaus, European Space Imaging

(more…)

Geotechnical Focus for Bentley Systems’ Corporate Update

Thursday, May 17th, 2018

Bentley Systems CEO Greg Bentley kicked off the Bentley Corporate Update webinar last week with a discussion of how the annual corporate update is different than in previous years. Journalists in 28 countries attended the 2017 Year In Infrastructure Thought Leadership Conference and Awards held in Singapore.

Leighton Asia Hong Kong Boundary Crossing – BIM Advancements in Construction – Be Inspired Award Winner (photo courtesy of Bentley Systems)

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise