Open side-bar Menu
 GISCafe Voice

Archive for the ‘asset management’ Category

Skylogic’s 2018 Drone Market Sector Summary Report Offers Timely Research and Analytics on the Industry

Thursday, November 15th, 2018

Colin Snow of Skylogic, LLC, spoke with GISCafe Voice about the company’s 2018 Drone Market Sector Summary Report that was recently published. This is the third annual report published by the company.

2018 Drone Market Sector Report

(more…)

GISCafe Editorial Calendar 2019

Wednesday, November 7th, 2018

GISCafe will focus on specific editorial for 2019, so be sure to check in with our Editorial Calendar to find out when might be a good time for your story to be shown. Throughout the year, we provide space for Current Events, as the technology industry is evolving, and we can’t know at the time of this writing just what will be new, groundbreaking and/or disruptive in the coming year.

 

(more…)

Digital Evolution Moves On at Bentley Year in Infrastructure 2018 in London

Thursday, October 18th, 2018

“Going digital” has been a Bentley Systems theme that evolved further in London at the Bentley Year In Infrastructure 2018 conference, held at the Hilton London Metropole this past week.

(more…)

New Resource Center Hazard HQ from CoreLogic Offers Public Access to Analysis and Data Insights

Wednesday, August 15th, 2018

CoreLogic®, a leading global property information, analytics and data-enabled solutions provider, recently announced the launch of its new publicly-accessible risk information resource center, Hazard HQ(tm). This new information hub will offer individuals, media and companies high-level analyses and up-to-date data insights on the immediate risks natural catastrophes pose to properties across the country.

The latest risk summary for Hazard HQ focuses on the ongoing California wildfires. As comprehensive risk assessment needs increase alongside growing economic losses from natural catastrophes, Hazard HQ offers a high-level risk perspective for individuals and companies who wish to understand how hazards like earthquakes, floods, hurricanes, severe convective storms, wildfires, wind and volcanic activity can impact their regions.

Senior leader of content and strategy for CoreLogic, Maiclaire Bolton Smith, spoke with GISCafe Voice about the new resource center and how it is dedicated to offering catastrophe insights about events while they are happening.

Does Hazard HQ take in citizen information?

No, it focuses on information from CoreLogic. Corelogic can provide insight and information, whether wildfire, hurricane, earthquake or flooding, and offers insights on number of properties that could be at risk, or on an area that could be impacted and the home value that could be lost. No information is pulled from citizens. It’s our opportunity to share information with others to help them protect themselves and be able to restore from financial catastrophe.

It really evolved as a way for us to share information easily.

We’ve had all these devastating wildfires this summer already. We always try to learn from the events that have happened. We’ll always be providing more information on research. For example, with regard to the wildfire that happened in Sonoma County, California last year that impacted Santa Rosa, over the past six months we’ve done a lot of research looking at the reconstruction from that wildfire and the state of the homes being rebuilt and looking at some of the insurance impacts and implications from that event happening. An event doesn’t end when an event ends, it’s a long process afterwards to really recover from it, so we will continue to share more information on an ongoing basis as we continue to research events.

How do you expect risk analysis you’ve done last year is going to impact or help in the assessment of the damage of the Mendocino fire, as an example, right now?

The biggest factor is that it brings awareness to the impact that these devastating events do have. We hear about the hundreds of thousands of acres burned, but a lot of times the fires are burning in remote areas and there are not a lot of properties at risk. It’s devastating to see the area burned, but what we want to focus on is bringing awareness to insurers and other people about where there are homes and properties at risk, and focus on the human aspects of it. What people can take away from our previous research, is

  1. Being prepared for hazards that could happen, whether it be a flood, earthquake, hurricane, etc. We’re prone to disasters all the time in various parts of the country.
  2. Awareness of the events that can happen, and our main goal is to work with insurance companies and help them understand what properties are valued at to be able to insure properties properly.
  3. The general public needs to know they need insurance for a lot of these hazards. Insurance can really help them recover from events when they do happen. Hopefully they won’t be impacted but if they are, to know their risk and to be able to accelerate their recovery is a huge bonus.

Say a customer is obtaining insurance for things they expect but what about these events that happen way beyond anyone’s expectations?

Unfortunately, those rare events are the wild card that are really beyond planning scenarios. I’m actually a seismologist by training and I spend a lot of time training people to know their earthquake risk. I always say the number one thing people can do to prepare for an earthquake, is believe that it can happen, and that’s the same with all disasters. The possibility is there that it may occur. These are hard for people to conceptualize and plan for.

At CoreLogic we do risk modeling where we look at the range of events that can happen – the more common events to the very extreme events. That’s the information we provide to insurance companies, including what could the worst-case scenario even look like.

I have spoken to CoreLogic many times. In the past the company has said with the fires we’re expecting an increase in losses to homes because people have built closer to forests, and forests are not cleared as often, we run the higher risk.
(more…)

Trimble TBC v4.10 Simplifies the Creation of GIS Deliverables

Thursday, June 14th, 2018

In May, Trimble announced version 4.1 of Trimble® Business Center office software designed for surveyors and geospatial professionals to simplify the creation of cadastral, GIS, infrastructure inspection and tunneling deliverables. Using new cloud-based data synchronization and workflow task management capabilities, Version 4.1 provides seamless integration with Trimble Access™ 2018 field software to improve field-to-office productivity.

(more…)

Boundless Ventures Offline with the Offline Tile Server

Wednesday, June 6th, 2018

Anthony Calamito, chief geospatial officer at Boundless talked about the Boundless Offline Tile Server that delivers rapid access to basemaps around the world, drilling down to the street and building level, to professionals who can’t rely on internet connectivity out in the field.

(more…)

Special GISCafe Coverage: Geospatial Data Providers and Services

Thursday, May 24th, 2018

Data providers abound in the GIS and geospatial industry. Choices range from mapping, built and natural terrain modeling, survey, GIS/LIS technologies, geospatial web, and asset inventory, mapping, geodetic and engineering surveying, photogrammetry, satellite imagery and real-time satellite data, remote sensing, aerial and ground-based LiDAR surveys, geographic and land information systems (GIS/LIS), 3D scanning, and spatial computing and analysis and much more.

Hamburg Port Rathaus, European Space Imaging

(more…)

Geotechnical Focus for Bentley Systems’ Corporate Update

Thursday, May 17th, 2018

Bentley Systems CEO Greg Bentley kicked off the Bentley Corporate Update webinar last week with a discussion of how the annual corporate update is different than in previous years. Journalists in 28 countries attended the 2017 Year In Infrastructure Thought Leadership Conference and Awards held in Singapore.

Leighton Asia Hong Kong Boundary Crossing – BIM Advancements in Construction – Be Inspired Award Winner (photo courtesy of Bentley Systems)

(more…)

Calling All Geospatial Data Providers for Upcoming GISCafe Special Coverage

Friday, May 4th, 2018

Data providers abound in the GIS and geospatial industry. Choices range from mapping, built and natural terrain modeling, survey, GIS/LIS technologies, geospatial web, asset inventory, mapping, geodetic and engineering surveying, photogrammetry, satellite imagery and real-time satellite data, remote sensing, aerial and ground-based LiDAR surveys, geographic and land information systems (GIS/LIS), and spatial computing and analysis, data provided by drones, and much more.

McMurdo Station Iceberg, Antarctica, NASA, taken from a small sat.

(more…)

Vista LiDAR Sensor Unveiled for Autonomous Vehicles

Thursday, April 26th, 2018

Cepton Technologies, Inc., a provider of 3D LiDAR solutions for automotive, industrial and mapping applications, recently introduced its Vista LiDAR sensor at the annual NVIDIA GPU Technology Conference, making it immediately available for the autonomous vehicle market.

Vista on the car

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise